Canon imageCLASS MF6540 Basic Operation Manual

Also see for imageCLASS MF6540: Basic guide Starter Guide Advanced guide Software guide Starter Guide

Contents

12-29Machine SettingsSYSTEM SETTINGS7. USE HTTP Sets whether to activate HTTP (HyperText Transfer Protocol) forthe Remote UI.ON (PORT NO.)OFF––8. SET IP ADD RANGE Sets whether to restrict the range of IP addresses.OFF Disables restriction of IP address of computers.ON Enables restriction of IP address of computers from which data(print/fax jobs) can be sent to the machine.1. PERMIT/REJECTSelects whether to permit or reject access from a specified IPaddress.REJECTPERMIT––2. SET IPADDRESSSpecifies the IP address range. and IP ADDRESS> must be entered for each setting.1. IP ADDRESS 12. IP ADDRESS 23. IP ADDRESS 34. IP ADDRESS 4––––9. RX MAC ADD SET. Sets whether to activate a MAC address filter.OFF Disables MAC address filter.ON Specifies a MAC address filter to access. MAC address must beentered for each setting.1. PERMIT RX ADD12. PERMIT RX ADD23. PERMIT RX ADD34. PERMIT RX ADD45. PERMIT RX ADD5–––––