Canon imageFORMULA DR-2010M User Manual

Also see for 3950B002: Brochure

Contents

Back Previous Page Next PageContents95Chapter 7 Maintenance1. Regular Maintenance .............................................................. 95Cleaning the Scanner............................................................................ 95Cleaning the Inside of the Scanner ....................................................... 95Cleaning the Sensor Glass and the Rollers ........................................... 962. Removing and Attaching the Rollers and Document Holding Guide ........ 98Roller Replacement Cycle..................................................................... 98Resetting the Counter........................................................................... 98Removing/Attaching the Feeding Roller.............................................. 101Removing/Attaching the Retard Roller ............................................... 103Removing/Attaching the Document Holding Guide............................. 1051. Regular MaintenanceClean the scanner on a regular basis, as described below, to maintain peakscanning quality.CAUTION• When cleaning the scanner and the inside of the scanner, turn OFF the powerswitch and disconnect the power cord from the power outlet.• Do not use spray cleaners to clean the scanner. Precision mechanisms, suchas the light source, may get wet, and cause a malfunction.• Never use paint thinner, alcohol, or other organic solvents to clean thescanner. Such solvents can damage or discolor the exterior of the scanner,or create a risk of fire or electrical shock.To clean the exterior of the scanner, dampen a cloth with water or a mild detergent,wring the cloth out thoroughly, and then wipe the dirt away. Then use a dry, softcloth to wipe away any moisture.Dust or paper particles inside the scanner may cause lines or smudges to appearon scanned images. Use compressed air to periodically clean dust and paperparticles from the document feed opening and the inside of the scanner. Afterfinishing a large scanning job, turn OFF the scanner and then clean out any paperparticles remaining inside the scanner.Cleaning the ScannerCleaning the Inside of the Scanner