Canon imagePROGRAF GP-4000 Online Manual

Also see for ImagePrograf GP-2000: Quick guide Online manual Setup guide

Changing the Type of PaperFollow these steps to change the type of paper specified on the printer after you have loaded paper.If you continue using the same type of paper and set Media type selection method to Use current mediatype, when you load paper, the media type selected before Use current media type was set is selectedautomatically, eliminating the need to set the media type. (See "Using the Same Type of Paper Regularly.")Note• This printer has the ability to estimate the media type by the data read by the sensor when the paper•is set. If you continue to use this feature, you will learn the data that you read and the accuracy of themedia type estimation. If you continue to use multiple media types, this feature will reduce the need toselect the media type each time you set the paper. (See "Paper-related settings.")Important• For best printing results, the printer fine-tunes the print head height and the feed amount for each type•of paper. Be sure to select the type of paper to use correctly before printing.• Because the printer fine-tunes the feed amount for each type of paper, the margins and the size of•printed images may vary depending on the type of paper used. If margins and the size of images arenot as you expected, adjust the paper feed amount.(See "Adjusting Feed Amount.")• Rolls and sheets have different printing areas, and sheets having a larger bottom margin than rolls.•(See "Print Area.")Changing the Type of PaperNote• When you load roll paper, a menu for selecting the media type appears on the touch screen. Tap the•media type.If no barcode has been printed on the roll paper and you have set Manage remaining roll amount toBarcodes, specify the roll length after selecting the media type. (See "Specifying the Paper Length.")1. Tap paper settings display area on Home screen of touch screen.1.104