Preparing to Transfer the PrinterTo protect the internal parts in transit, always follow these steps before transferring the printer to a newlocation.For details on installing the printer after transfer, see Reinstalling the Printer.Important• Be sure to contact your Canon dealer before transferring the printer to a new location. Ink may leak anddamage the printer if you do not prepare the printer correctly and it is tipped or stood on end in transit.• When moving the printer, make sure that the basket does not rub against the floor. If the basket rubs onthe floor, it may get dirty or damaged.Note• The maintenance cartridge replacement may be required when you execute the Prepare tomove menu. Prepare the maintenance cartridge in advance while referring below. The numberof maintenance cartridge required varies depending on the amount remaining in the maintenancecartridge being used.• If you can move the printer in a level state using casters or something similar, you do not need toexecute Prepare to move.• Always follow the instructions of the service representative when preparing to transfer the printer.•The following lists transport restrictions by type of transport.Move indoors on the same floorUsage Examples: Move indoors by carryingTransport and storage in low temperature environments: NoPermitted angle of inclination: All directions: within 30°Required maintenance cartridges: 1-3Move indoors to a different floorUsage Examples: Moving the printer while temporarily tilting it such as when using the stairsTransport and storage in low temperature environments: NoPermitted angle of inclination: All directions: within 90°Required maintenance cartridges: 1-3Transport outdoorsUsage Examples: Transport By VehicleTransport and storage in low temperature environments: YesPermitted angle of inclination: All directions: within 90°Required maintenance cartridges: 3Preparing for Transportation1. Remove the paper.1.• Rolls•419