Canon imagePROGRAF W2200S Setup Manual

Also see for imagePROGRAF W2200S: User guide User guide

Contents

Setting with the GARO Device Setup Utility 2-3ImportantSetting with the GARO Device Setup UtilityIf you are using Windows, you can use the GARO Device Setup Utility toset the network information.Checking the Printer MAC AddressFor the network settings you need the printer MAC address (the numberused to identify the built-in network interface board).Follow the procedure below to perform an Ext. I/F Print so you can checkthe MAC address. Before printing, make sure A4 or Letter size paper isloaded in Cassette 1.z Always load A4 or Letter size paper in Cassette 1. If a smaller size is loaded, itmay smear ink inside the printer and onto other media.z You do not need to select the media size on the operation panel. The media is forcefed from Cassette 1 to print the pattern.1 Press the Power button to switch the printer on.After a few seconds “Ready” is displayed in the operation panel and theOnline lamp lights.2 Press the Online button to switch the Online lamp off.The printer is set offline.