07 Easy Operation Guide Copy 08Making a Copy Easy Operation GuideCopy PrefaceOther PrintScan Send/Fax1 2 3 4Making a CopyThis section describes the basic operation procedure for copying originals.Display the Copy Screen Place Your Originals Specify the Number of Copies Start CopyingPress (COPY) to display the top screenof the Copy function.Place your originals in the feeder or on theplaten glass.Enter the desired number of copies(1 to 999) using – (numerickeys).Press (Start).Close the feeder/platen cover after placing your originals onthe platen glass.To change the value you have entered, press (Clear) →enter the correct value.The number of copies you specify is displayed on the upperright side of the touch panel display.When the screen below appears, select the original size →press [OK] → (Start).To cancel copying, press (Stop). You can also cancel thecurrent copy job by pressing [Cancel] on the screenindicating the copy processing status.*If the machine is in the Sleep mode, press (Power).How to Log in to the Machine* The canceling procedure differs depending on the job status.For more information, see Chapter 1, “Introduction to CopyFunction,” in the Copying Guide.PDF on User Manual CD-ROMEnter your Department ID and password if the screen prompts you to do so → press (Log In/Out).Enter your User ID and password if the screen prompts you to do so → press (Log In/Out).Insert the control card if the screen prompts you to do so.When you have finished the operations, press (Log In/Out) or remove the control card to log out.For more information, see Chapter 2, “Basic Operations,” in the Reference Guide.Copying GuideCopying GuidePlease read this guide before operating this product.After you finish reading this guide, store it in a safe place for future reference. ENGCopying GuideCopying GuideCopying GuidePlease read this guide before operating this product.After you finish reading this guide, store it in a safe place for future reference. ENG