Canon imageRUNNER 2545i Easy Operation Manual

Also see for imageRUNNER 2520: Printer guide User guide Client guide User guide Service manual

Contents

09 Easy Operation Guide Copy 10Basic Copying Functions Easy Operation GuideCopy PrefaceOther PrintScan Send/FaxThis section describes the operation procedures for the Copy functions you can access from the top screen ofthe Copy function.Basic Copying FunctionsYou can make an enlarged or reduced copy from the original of a standardpaper size, such as A4 original to A3 or to A5 original. The optimal copy ratiois automatically set by selecting the desired paper size from the paper sizekeys.You can also set the copy ratio from 25% to 400% in 1% increments on theCopy Ratio screen.Press [Copy Ratio] → select or set the desired ratio → press [Done] asindicated on the touch panel display.You can automatically set the copy ratio by pressing [Auto] on the Copy Ratio screen.Making Enlarged/Reduced CopiesYou can optimize the copy density level for the original, automatically or manually.Press [Light] to make the density lighter or press [Dark] to darken tothe desired level. Press [A] (Auto) to automatically set the densitylevel.You can use the stack bypass as a temporary paper source for the size ofthe paper that is not loaded in any paper drawers.Using Paper Not Loaded in the DrawersAdjusting the Density of Copied ImagesYou can set the machine to optimize the copy output quality byselecting the type of your original. If your original contains both textand photo images, select [Text/Photo].Press the original type drop-down list box →select the original type from [Text], [Text/Photo],or [Photo].Optimizing the Copy Output QualityStack Bypass—A Multi-purpose Paper TrayTo specify the paper size and type:Load the paper in the stack bypass as illustrated → select the paper size → press[Next] → select the paper type → press [OK] → [Done] as indicated on the touchpanel display.*The stack bypass is now chosen as the paper source.To manually select the stack bypass as the paper source after the paper isloaded and its size and type are specified:Press [Paper Select].Select the key for the stack bypass as shown left → press[Done].*** Disable the Stack Bypass Standard Settings if the screens for specifying the paper sizeand type are not displayed even when you load paper in the stack bypass. See Chapter 3,“Configuring the Machine’s Basic Settings,” in the Reference Guide.** The specified paper size and type are displayed on the key.The stack bypass is a versatile paper source that enables you to print on special sizes and types of paper.You can use it as a temporary paper source, as described above.You can use special sizes and types of paper that are not available in the paper drawers:– Non-standard size paper– Special types of paper such as thicker paper or labelsYou can specify the default paper size/type for the stack bypass.Specifying the paper size and type is required when you use the stack bypass. To skip this procedure, you can set and store the defaultpaper size and type by specifying Stack Bypass Standard Settings from the Additional Functions menu.For more information, see Chapter 3, “Configuring the Machine’s Basic Settings,” in the Reference Guide.Chapter 2❖Copying GuideChapter 2❖Copying GuideChapter 2❖Copying GuideChapter 2❖Copying GuideTEXT TEXT/PHOTOPHOTO32411423