Canon imageRUNNER ADVANCE 8500 series Troubleshooting Manual

Contents

1002 Jam code due to broken spring of the escape inlet flapper......................................................501008 Jam Code due to nip failure of post card feeding rollers (Finisher) .........................................53Error Code.......................................................................................................... 58E808-0007 Caused by the fixing drawer cable breakage..................................................................58E583-800x due to malfunction of the front/rear tray auxiliary guide or coming off of the bearingof lower stack delivery roller (Staple Finisher-V1 / Booklet Finisher-V1)....................................... 60E202-0001 and abnormal noise from the reader assembly during the operation due to thedetached flat cable unit..................................................................................................................68E840-0001 due to the defect securing screws for the fixing shutter motor....................................... 71E583-8001/E583-8002 due to malfunction of the front/rear tray auxiliary guides(Staple/Booklet Finisher_V1)..................................................................................................................... 73E004-0205/E197-0008/E263-0000/E808-000x/E840-0001 caused by damaged coating of thefixing drawer cable.........................................................................................................................76E197-0002 due to the worn coating of paper pick-up assembly cable..............................................78Measure against E674-0100............................................................................................................. 79E568-8002/Shaved gear tooth due to overloading with friction from sliding while theestrangement rack is moving (Staple-Q1/W1/Booklet-Q1/W1/Saddle-AM2/AN2/Finisher-AM1/AN1)...................................................................................................................................... 80E840-0001 due to rotation failure of a drive shaft in the upper fixing ass'y.......................................84E017-0002/0003 due to interference of a harness and a sensor flag............................................... 85Notice of proactive measure against E068-0001.............................................................................. 87Specifications-Related.......................................................................................88Regarding the replacing operation of photo-interrupter (shift tray - D1/E1/F1)................................. 88The breakage of copy tray hooks due to an overloading of output paper (Copy Tray-Q1/R1/R2 )... 90ii