Printing does not startThe Data lamp on the Control Panel does not light up .................................................................................... 863The printer does not respond even if print jobs are sent ................................................................................. 863Ink Filling.. is displayed ................................................................................................................................... 863The display screen indicates Agitating ............................................................................................................ 864The Data lamp on the Control Panel does not light upCause Corrective ActionThe printer is not on. Make sure the power cord is securely plugged in, all the way. Press the Power but-ton to turn on the printer.The target printer was not selec-ted when printing. (The printer isin Sleep mode.)In Windows, select the printer by clicking Select Printer or Printer in the printingdialog box and try printing again.In Mac OS X, open the dialog box of the printer driver, select the printer from thelist of Printer, and try printing again.The print job is paused. (Theprinter is in Sleep mode.)In Windows, restart the print job as follows.1. Select the printer icon in the Printers and Faxes (or Printers ) window.2. Clear Pause Printing in the File menu to restart the print job.In Mac OS X, restart the print job as follows.1. Click Print & Fax. (This is identified as Printer Setup Utility or Print Centerin other versions of Mac OS X.)2. Select the printer, and then Resume Printer (or Start Jobs ) in the Printersmenu to restart the print job.The printer does not respond even if print jobs are sentCause Corrective ActionThe printer is offline. Press the Online button on the Control Panel to bring the printer on-line.You have printed when select Save in mailbox is selected in Output Method.Print the job saved on the printer's hard disk.(See "Printing Saved Jobs.") →P.572Ink Filling.. is displayedCause Corrective ActionThe printer was forced off during oper-ation.Wait until the system has been filled with ink. This process may take aboutten minutes.Troubleshooting > Printing does not start >iPF815 The Data lamp on the Control Panel does not light up12863Downloaded from ManualsPrinter.com Manuals
