N: New adjustment item*1: New Service Tool that operates only on a pre-registered computer.(2) Periodic maintenanceNo periodic maintenance is necessary.(3) Periodic replacement partsThere are no parts in this machine that require periodic replacement by a service engineer.(4) Replacement consumablesThere are no consumables that require replacement by a service engineer.at the sametime.)NCarriage railposition adjustment- At carriage unit replacement- At carriage unit removalTo set the carriage rail to theoriginal position prior to removalor replacement of the carriageunit, put a mark on the mainchassis before removal of thecarriage unit.None. 1 min.LAN resetting - At logic board replacement- At WLAN board replacementTo initialize the network setting. None.Perform in the usermode.- Machine buttons- Host computer (IJNetwork tool)1 min.Wired / WirelessLAN settinginformation display- At confirmation of thenetwork settingTo confirm the network setting. None.Perform in the usermode.- Machine buttons- Host computer (IJNetwork tool)1 min.- The red screws securing the paper feed motor may be loosened only at replacement of the paper feed motor unit.- For print head alignment, perform the manual print head alignment using plain paper.2 / 4 4