48Using the Full Rangeof FeaturesEChanging the Remote Sensor ModeTwo remote sensor modes and an off setting are available to prevent interferencefrom other Canon wireless controllers being used nearby.Turning the Remote Sensor OffOpen the menu and select [SYSTEM]. Select [WL.REMOTE], set it to [OFF B] and close the menu.“B“ appears.Changing the Remote Sensor Mode1. On the camcorder, open the menu and select[SYSTEM]. Select [WL. REMOTE], set it to [A 2] andclose the menu.The selected mode appears for 4 seconds.2. On the wireless controller, press and hold theREMOTE SET button. Press the ZOOM T button formode 2. Keep the button pressed for over 2 seconds.If you have set the camcorder to mode 1, press the ZOOM Wbutton for mode 1.❍ The wireless controller returns to mode 1 when youreplace the batteries. Change the mode if necessary.❍ Make sure that camcorder and wireless controller are set to the same mode.Display the camcorder’s mode by pressing any button on the wireless controller(except of the REMOTE SET button) and set the wireless controller’s mode tothe same mode. Change the batteries if the wireless controller still does notwork.CARD PLAY (VCR)CARD CAMERAPLAY (VCR)CAMERACARD PLAY (VCR)CARD CAMERAPLAY (VCR)CAMERAWL.REMOTE•••• 1SYSTEMWL.REMOTE•••• 1SYSTEMWIRELESS CONTROLLER WL-D79PAUSEAV INSERT AV DV REMOTE SETSLOW 2RECPAUSEAUDIO DUB.W TSTART/STOP PHOTO ZOOMSELF T. D.EFFECT.ON/OFF SETMENUTV SCREEN( 43)( 43)
