98 EditingEUsing a Microphone❍ When using the built-in microphone: Do not connect any cables to themicrophone terminal or the accessory shoe.❍ When using an external microphone: Connect it to the microphone terminal.❍ When using the DM-50 Microphone: Do not connect any cables to themicrophone terminal.❍ When you connect a TV via the S-video terminal, you can check the picture onthe TV screen and the sound with headphones connected to the camcorder.When you connect a TV via the AV terminal, you can check the picture on theTV screen but you cannot check the sound with headphones.Dubbing1. Set the camcorder to PLAY (VCR) mode and load a recorded cassette.2. Open the menu and select [AUDIO SET UP]. Select [AUDIO DUB.], set itto [AUDIO IN] or [MIC. IN] and close the menu.3. Locate the scene you wish audio dubbing to start.4. Press the PAUSE a button on the wireless controller.5. Press the AUDIO DUB. button on the wirelesscontroller.• “AUDIO DUB.” and “ a” appear.• If the optional DM-50 microphone is attached,(Connection) appears.6. Press the PAUSE a button on the wireless controllerto begin dubbing.• Audio device: Begin playback.• Microphone: Direct your voice to the microphone.CARD CAMERACARD CAMERAPLAY (VCR)CAMERAPAUSEAV INSERT AV DV REMOTE SETSLOW 2STOPRECPAUSE12bitAUDIO OUTAUDIO DUB.REWPAUSEAV INSERT AV DV REMOTE SETSLOW 2PLAYSTOPFFZERO SETMEMORY12bitAUDIO OUTAUDIO DUB.MICAUDIO DUB.•••AUDIO INAUDIO SET UP( 43)
