Caple C871i Instruction Manual

Contents

Caple C871i Instruction Manual Manual pdf 10 page image

EN 22 / USING YOUR APPLIANCE••DESCRIPTION OF THE CONTROLPANEL••Start/stop touch control.Power level - + touch controls.Memory function touch control.Interrupt function touch control.Booster max power touch control.Offset programming touch control.Timer touch controls.ABCTipFor simultaneous use, favour the useof cooking zones located on oppositesides of the hob.On the same side, the use of a cookingzone at maximum power results in an auto-matic limitation of the other cooking zoneon that side, which is indicated in the powerlevel display.CA B••GD FEMEMORY FUNCTIONAllows you to access a determined powerlevel at any moment. Press the button andthe hob will heat up to a determined powerlevel (The power level defined by the manu-facturer is 8), but the user can change thevalue of this power level by following thesesteps.Modification of the memory function power(With the hob switched off)1. Keep the button pressed down until abeep sounds.2. The power level which has been definedwill flash on the display.3. Modify the power level with the “-”and“+”power level buttons (B).4. Press the button again to validate theoperation.5. Switch off the hob.INTERRUPT FUNCTIONThis allows you to always be able to trip thepower for a certain time. This gives the usertotal flexibility.1. Start with the hob switched on and a deter-mined power level.2. Press the button and then you canenter the new power level and the time whichit is going to be active. The power level isadjusted with the “-”and “+”buttons in zone (B)and the duration is adjusted using the “-”and“+”buttons in zone (G).3. Then validate by pressing the button .4. The new power level is displayed with a dot.5. Once the time has passed, return to the ini-tial position and the dot will disappear.MAX POWER BOOSTERThe cooking areas are equipped with a“BOOSTER” function. This function meansthat the maximum temperature can be obtai-ned quickly.1.Press the power level button. The hobpower display will display (bo) and the hobwill start to give maximum power.••DEFG10POWERING ONPress the start/stop button for the cooking zoneyou want to use. A flashing 0 and a bip indicatethat the cooking zone is on. You can thenchoose the desired power level.If you do not select a power level, the cookingzone will automatically turn itself off.STOPPress the start/stop button for the cookingzone used or the power level " --" button until 00is displayed.ADJUSTING THE POWERPress the + power level button, and a bip* willconfirm that your settings from 1 to P (maximumpower) are actually taken into account.When it is switched on you can move directly tomaximum power "P" by pressing the "--" powerlevel button.