Caple CR 13400 Instruction Manual

Contents

Caple CR 13400 Instruction Manual Manual pdf 4 page image

4Electrical RequirementsWARNING!ELECTRICITY CAN BE EXTREMELY DANGEROUS.THIS APPLIANCE MUST BE EARTHED.For your safety please read the following information:This appliance must be installed by a qualified technician according with the currentlocal regulations and in compliance with the manufacturer instructions.The appliance must be connected to the electrical network verifying above all that thevoltage corresponds to the value indicated on the specifications plate and that the cablessection of the electrical plant can bear the load which is also indicated on the plate.The cooker must be connected directly to the mains placing an omnipolar switch withminimum opening between the contacts of 3 mm between the appliance and the mains.The power supply cable must not touch the hot parts and must be positioned so thatit does not exceed 75°C at any point.Once the cooker has been installed, the switch must always be accessible.Before effecting any intervention on the electrical parts the appliance must bedisconnected from the network.IMPORTANT: This cooker must be connected to a suitable double pole controlunit adjacent to the cooker.NO DIVERSITY CAN BE APPLIED TO THIS CONTROL UNIT.