Caple CR9209 Instruction Manual

Contents

Caple CR9209 Instruction Manual Manual pdf 16 page image

Instruction manual CR920916Please keep this instruction manual for future referenceFAN HEATThermostat between 60˚C and MAXThe circular heating element and fan operate simultaneously spreading the heat evenly throughout the oven cavity. Varioustypes of food can be cooked on different shelves, naturally with the appropriate cooking times. The oven must be preheatedbefore the foods are placed inside. Fan Heat provides optimum results for: cakes, large quantities of foods and cookingvarious dishes simultaneously. To operate, please select Fan Heat function along with the temperature.TURBO DEFROSTThermostat – no temperature selectedThe fan located at the bottom of the oven makes the air circulate at room temperature around the food. This isrecommended for the defrosting of all types of food, in particular, for food that does not require a lot of heat such asice cream, cakes, cream or custard desserts. By using the fan,the defrosting time is approximately halved. In the case ofmeat, fish and bread, it is possible to accelerate the process using the Fan Heat and setting the temperature between80˚C and 100˚CNOTE:All the functions mentioned above switch the oven internal light on. A warning light on the control panel will stay lit untilthe temperature is reached; after it will light up intermittently. The oven door must be closed for all cooking methods.Electronic programmerLED programmer- Showing time (0:00-24:00) and minutes.- The screen shows 3 numbers and “AUTO” if the power is on- To set the time, press the button first, then + or – button to change digits to the correct timeManual operation setting- If “AUTO”is flashing (automatic or a semi automatic program has been set), press button to remove “AUTO” – themanual operation process is now on.Automatic setting(set the full automatic starting and ending)1. Press button, set cooking time.2. Press button, set finish time.3. Set temperature and cooking function by turning the thermostat knob and selector knob.- After the setting above,“AUTO”will be flashing, which means the cooking process of the oven is set.For example: if cooking time is 45 minutes and finish time is 14:00, press and set cooking time to 45 minutes, thenpress and set finish time to 14:00.After the above setting, the screen will show the real time (hours and minutes) and “AUTO” will flash, this indicates thecooking time has been set.When the clock turns to be 13:15 or between 13:14-13:15, the oven will automatically start the cooking process –and “AUTO” should flashWhen the clock turns to 14:00 cooking will automatically end, the alarm will sound and“ AUTO” will flash.To stop alarm pressMAXMAX60801001201401601802002206080100120140160180200220˚CMAXMAX60801001201401601802002206080100120140160180200220˚C