Cardinal CS Series Operation Manual
Also see for CS Series: Operation manualOperation manualOperation manual
                                    | |
Contents
|
8526-M256-O1 Rev B • CS Series 13OPERATIONAL SETUP, CONT.)H& – Automatic Power-Off1. With the WEIGHT display showing )H& with the 1 flashing, press the 2 key onthe alphanumeric keypad.2. The WEIGHT display will change to )H& with the 2 flashing.3. Press the MC key.4. The PIECE WEIGHT display will change to show the current setting.5. If the setting displayed is acceptable, press the MC key to save it.6. Otherwise, using the numeric keys, enter a desired value for the scale to beautomatically turned OFF when it is not in use and press the MC key to save it.Available values are from 1 to 10 minutes. Note that entering 00 will disable the autopower-off function.)H& – Stable Range for Quantity Sample1. With the WEIGHT display showing )H& with the 2 flashing, press the 3 key onthe alphanumeric keypad.2. The WEIGHT display will change to )H& with the 3 flashing.3. Press the MC key.4. The PIECE WEIGHT display will change to show the current setting.5. If the setting displayed is acceptable, press the MC key to save it.6. Otherwise, using the numeric keys, enter a desired value for the Stable Range forQuantity Sample and press the MC key to save it. Available values are from 00 to 15.NOTE! Selecting a larger number makes the sampling faster, but less accurate.Also, selecting a smaller number makes the sampling slower, but more accurate.)H& – Automatic Average Unit Weight1. With the WEIGHT display showing )H& with the 3 flashing, press the 4 key onthe alphanumeric keypad.2. The WEIGHT display will change to )H& with the 4 flashing.3. Press the MC key.4. The PIECE WEIGHT display will change to show the current setting.5. If the setting displayed is acceptable, press the MC key to save it.6. Otherwise, select the desired setting for the Automatic Average Unit Weight andpress the MC key to save it. – No Automatic Average Unit Weight FunctionPress the SAMPLE key for manual unit weight calibration. – Automatic Average Unit Weight FunctionIf counting data increases over 10% compared with the previous sampling value,and the increase is less than 100% of previous sampling value, the automatic unitweight calibration will be proceed again. |
Related manuals for Cardinal CS Series
Cardinal CS Series Operation Manual
Cardinal CS Series Operation Manual
Cardinal CS Series Operation Manual
Cardinal D Series Operation Manual
Cardinal AP Series Operation Manual
Cardinal DS Series Operation Manual
Cardinal HSDC series Operation Manual
Cardinal Detecto C Series Operation Manual
Cardinal C6 Operation Manual
Cardinal 708 Operation Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine