Cargo Floor CF500 SLC Assembly Instructions Manual
Also see for CF500 SLC: ManualReplacement instructionsTechnical user's manual
                                                         | |
Contents
| 
Assembly instructions CF500 SLC Bulkmoverwww.cargofloor.com Page 38Version 01 / 12-12-2018TECHNICAL SPECIFICATIONSSystem operation : fully hydraulic, with three double-action cylindersSystem control : fully hydraulic mechanicalControls : fully automatic loading – stop – unloading, optional A/B-controlCF500 SLCBore (mm) 100 [4”]Piston rod diameter (mm) 45 [1.77”]Stroke (mm ) 200 [8”]Cylinder volume (ltr) 2.82 [0.75 us gal]Oil volume per cycle (ltr) 8.46 [2.25 us gal]Over pressure valve threshold, max. operational pressure (bar) 225 [3,300 psi]Strokes per minute with advised pump capacity 13Speed (mtr./min.) with advised pump capacity 2.6 [8.5 ft./min]Advised pump capacity:Flow (ltr./min.) 110 [29 gpm]Pressure (bar) 250 [3,625 psi]Max. pump capacity:Flow (ltr./min.) 130 [34.5 gpm]Pressure (bar) 250 [3,625 psi]Speed at maximum pump capacity (mtr./min.) 3.1 [10 ft./min]Control valves : 24V DCThroughput variation : completely variable speed by use of oil flow determined by the revs of the motoror by various pumps. Pay attention to the diameter of the choke, see chapterconnecting the hydraulics.Drive : use of the PTO/pump on the truck; an electro-hydraulic aggregate or a hydraulicaggregate with an external combustion engine.Filter : pressure filter type: high-pressure 10 micron (part number 7372005).Pressure piping : Ø 20 x 2 feed through 16 mmReturn piping : Ø 25 x 2,5 feed through 20 mmOil ISO VG 32 : Shell Tellus T32 or BP HL2-32 or ESSO Univis 32 (or equivalent).Only use biological oil after agreement by Cargo Floor B.V.Biological oil : a biological oil of the type synthetic ester (HEES) can be used as standard withthe CF500 SLC BULKMOVER system. We advise you not to use other types ofbiological oil.Oil temperature : max. 70 °C [158 °F]FloorProfiles : aluminiumProfile length negotiableThickness 6 mm, 10 mm, HD 8 mm [0.24”, 0.39”, HD 0.31”]Width 156,8 mm [6.2”]Moving floor width standard 2.355 mm [92.7”] for an inner width of 2.500 mm[98.4]Quality : high quality alloy, weldable, very wear-proof and tensileBearing : the aluminium floor profiles are supported by wear-resistant plastic bearingCargo Twister WIDE 40/25 of Special WIDE bearing 40/25.Guide bearing surface : the total bearing surface of the Cargo Twister WIDE 40/25 is 144 cm2 [22.32sq.inch]. The total number of guides, which can be varied as required,determines the total guide surface area.Under floor : steel as well as aluminium. For the plastic bearing use the rectangular tubes40x25x2 [1.6”x1’x0.08”] or aluminium u-profile. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine