Physical data — SI (cont)COOLER30HR,HS SIZE 070,080,090 100,110,120 140,160COOLER PART NO. 40HA401--- 664 684 704DIMENSIONSOD (mm) 324 406 406Length (mm)* 2057 2108 2743NET WATER VOLUME (L)† 82.1 152.9 198.3REFRIGERANT CIRCUITS 2 2 2MAXIMUM DESIGN WORKINGPRESSURE (kPa)Refrigerant Side 1620 1620 1620Fluid (Shell) Side 2068 2068 2068FLUID CONN. (in.)Inlet and Outlet 4** 5** 6**Drain 3⁄ 4 FPT 3 ⁄ 4 MPT 3⁄ 4 MPT*Between tube sheets.†Includes nozzles.**Victaulic-type water connections.CONDENSERCONDENSER PART NO. 09RP--- 033 043 054 070 084DIMENSIONSOD (mm) 273 324 324 324 356Length (mm)* 1715 1956 2118 2419 2108NET FLUID VOLUME (L) 21.6 32.2 37.5 43.1 51.9FLUID CONN. — in. diameter†Inlet IPS** 2 1 ⁄ 2 3 3 3 2 1⁄ 2 ††Outlet IPS** 21 ⁄ 2 3 3 3 4FLUID PASSES 3 3 3 3 3 or 6MAXIMUM DESIGN WORKING Refrigerant Side — 2654PRESSURE (kPa) Fluid Side — 1724LEGENDIPS — Iron Pipe SizeOD — Outside Diameter*Between tube sheets.†On part no. 084 condensers, data is for 3-pass only. For 6-pass, inlet and outlet connections are 21 ⁄ 2 inches.**Field welded (flange with weld stub provided for all connections).††The 09RP084 has 2 inlet connections.NOTES:1. The 21 ⁄ 2-in. and 3-in. condenser connections are equipped with slip-on flanges bolted to the condensers anddesigned for field welding of field-supplied 21 ⁄ 2-in. and 3-in. schedule 40 pipe.The 4-in. condenser connections are equipped with welding neck flanges bolted to the condensers and designedfor field welding of field-supplied 4-in. schedule 40 pipe.2. Standard 30HR,HS160 unit is supplied with 3-pass condensers. To convert from 3 to 6 pass, proceed as follows:a. Remove 4-in. outlet flanges.b. Cover 4-in. (09RP084) 3-pass condenser fluid outlet with blind flanges (field supplied).3. Water outlet and inlet connections are rated according to ANSI/ASME B 16.5 (American National StandardsInstitute/American Society of Mechanical Engineers) latest revision.8