Carrier 40GJB Owner's Manual

Contents

nection pipe with insulating pipe, andinsulating pipe1. Connect the drain hose to the outlet pipe ofoutletpipedrain hosedrain hosetapeoutlet pipedrain hoseinsulating pipeAdd insulating pipe in the indoorThe plastic expansion particles are1. Open the panel, remove the screwon the wiring cover and then takeStep seven: connect wire of indoor unit4. Wrap the indoor pipe and joint of con-then wrap it with tape.Step six: install drain hoseInstallation of indoor unittorque wrenchopen-endwrenchindoor pipepipeunion nutHex nut diameterindoor unit.Note:drain hose in order to preventcondensation.not provided.down the cover.wiring coverscrewpanelNote:If a 18k indoor unit is to be connected with Free Match outdoor unit, a transitionalpipe joint (provided) should be added at the pipe joint of indoor unit evaporatorPlease refer to step 1-4 during installation.1/4 in (6 mm) 20.34~27.12 ft.lb(15~20 N.m)Tightening torque[ft.lb(N.m)]40.68~54.24 ft.lb(30~40 N.m)54.24~74.58 ft.lb(40~55 N.m)81.36~88.14 ft.lb(60~65 N.m)94.93~101.7 ft.lb(70~75 N.m)3/8 in (9.52 mm)1/2 in (12 mm)5/8 in (16 mm)3/4 in (19 mm)5/8 in (16 mm).20