Carrier 42HQE009 Owner's Manual

Also see for 42HQE009: Installation manual

Contents

AUTOMATIC OPERATIONAUTO COOL DRY HEAT FANTEMP CLOCKTIMER ONTIMER OFFSPEED AUTO LOW MED HIGHMODEONOFFTEMP.FANSPEEDAIRDIRECTIONSWINGCLOCKECONOMICRUNNINGTIMER ONTIMER OFFTIME ADJUSTOKCANCELThe OPERATION lamp on the display panelof the indoor unit starts flashing.1. Mode select button (MODE)Select AUTO.2. Temperature button (TEMP.)Set the desired temperature. Normally,set it between 21 C to 2 8 C3. ON/OFF buttonPush this button to start the air conditioner.The OPERATION lamp on the displaypanel of the indoor unit lights. Theoperating mode is selected in accordancewith the room temperature and operationstarts after approximately 3 minutes.ON/OFF buttonPush this button again to stop the airconditioner.If the AUTO mode is uncomfortable, youcan select the desired conditions manually.When you select the AUTO mode, you donot have to set the fan speed. The FANspeed display will show AUTO and the fanspeed will be automatically controlled.When you set the air conditioner in AUTOmode, it will automatically select cooling,heating (cooling only type without), orfan only operation depending on the roomtemperature.Once you select the operating mode, theoperating conditions are saved in the unit'smicrocomputer memory.Thereafter, the air conditioner will startoperating under the same conditions whenyou simply push the ON/OFF button of theremote controller.StartStop2311142HQE009/012 R-407C