AUTO COOL DRY HEAT FANTEMP CLOCKTIMER ONTIMER OFFSPEED AUTO LOW MED HIGHMODEONOFFTEMPFANSPEEDAIRDIRECTIONSWINGCLOCKECONOMICRUNNINGTIMER ONTIMER OFFTIME ADJUSTOKCANCEL123AUTO COOL DRY HEAT FANTEMP CLOCKTIMER ONTIMER OFFSPEED AUTO LOW MED HIGHMODEONOFFTEMPFANSPEEDAIRDIRECTIONSWINGCLOCKECONOMICRUNNINGTIMER ONTIMER OFFTIME ADJUSTOKCANCEL1234COOLING/FAN ONLY OPERATIONDRYING OPERATIONConnect the unit with the power.The OPERATION lamp on the display panel of the indoorunit starts flashing.1. Mode select button (MODE)Select COOL, HEAT (cooling only type without), orFAN ONLYON/OFF buttonPush this button again to stop the air conditioner.The FAN ONLY mode does not control temperature.Therefore, perform only steps 1,3, and 4 to selectthis mode.Connect the unit with the power.The OPERATION lamp on the display panel of the indoorunit starts flashing.1. Mode select button (MODE)Select DRY.2. Temperature button (TEMP.)Push the "TEMP." Button.The fan speed indicator displays AUTO. The Indoor fanspeed will be automatically selected LOW.3. ON/OFF buttonPush this button to start the air conditioner.The OPERATION lamp on the display panel of the indoorunit lights, and operation starts after approximately 3 minutes.ON/OFF buttonPush this button again to stop the air conditioner.2. Temperature button (TEMP.)Set the desired temperature.Cooling 21 C or higherHeating 28 C or lower3. Fan speed button (FAN SPED)Select any of the "AUTO" "LOW", "MED" and "HIGH"4. ON/OFF buttonPush this button to start the air conditioner.The OPERATION lamp on the display panel of the indoorunit lights. The operating mode is selected in accordancewith the room temperature and operation starts afterapproximately 3 minutes (If you select FAN ONLY mode,the unit will start immediately.)StartStopStartStop.1242HQE009/012 R-407C GBENGLISH