Carrier 42NQ009N Service Manual

Contents

7-1. Remote control7-1-1. Remote control and its functionsFILE NO. SVM-10036− 11 −7-1-2. Operation of remote control1. AUTOMATIC OPERATIONTo automatically select cooling, heating, or fan only operation.1. Press MODE : Select A.2. Press MODE : Set the desired temperature.2. COOLING / HEATING / FAN ONLY OPERATION1. Press MODE : Select Cool , Heat , or Fan only .2. Press MODE : Set the desired temperature.Cooling: Min. 17°C, Heating : Max, 30°C, Fan Only: No temperature indication3. Press : Select AUTO, LOW , LOW+ , MED , MED+ , or HIGH .ON OFF132678101816543141512911171PRESET FANMODEHI-POWER ECOFIXSWINGCLRSETSLEEPCHECK FILTER CLECKInfrared signal emitterONOF F1Start/Stop button ( )2Mode select button ( )3Temperature button ( )4Fan speed button ( )5Swing louver button ( )6Set louver button ( )7On timer button ( )8Off timer button ( )9Sleep timer button ( )10Setup button ( )11Clear button ( )12Memory and Preset button ( )13High power button ( )14Economy button ( )15Filter reset button ( )16Clock reset button ( )17Check button ( )183. DRY OPERATION (COOLING ONLY)For dehumidification, a moderate cooling performance is controlled automatically.1. Press MODE : Select Dry .2. Press MODE : Set the desired temperature.4. Hi-POWER OPERATIONTo automatically control room temperature and airflow for faster cooling or heatingPress HI-POWER : Start and stop the operation.operation (except in DRY and FAN ONLY mode)7. OPERATION DESCRIPTION