Carrier 48AK Installation, Start-up And Service Instructions Manual

Also see for 48AJ: Installation instructions Operation and service guide Started guide Operating and service guide

Contents

13Fig. 11 — Base Unit Dimensions — 48EJ,EK024-034NOTES:1. Weights include economizer (standard).2. Center of Gravity.3. Do not locate adjacent units with flue discharge facing economizerinlet.Min Clearances to be:Adjacent Units: 15′-0″ [4572].Top of Units: No Overhang.Condenser Coil: 4′-0″ [1219].Economizer Side: 6′-0″ [1829].Heat Side: 4′-0″ [1219].Filter Access Side: 10′-0″ [3048]. (For removal of evaporator coil.)4. For smaller service and operational clearances contact Carrier Appli-cation Engineering Department.5. Bottom ducts designed to be attached to accessory roof curb. If unit ismounted on dunnage, it is recommended the ducts must be supportedby cross braces as done on accessory roof curb.6. Dimensions are in inches [mm].