Carrier 50CO Series Installation, Operation And Maintenance Instructions

Also see for 50CO Series: Installation, operation and maintenance instructions

Contents

Carrier 50CO Series Installation, Operation And Maintenance Instructions Manual pdf 4 page image

2 - RECEIPT OF GOODS2.3 - DocumentsThe following documents should be inside the unit:- Instruction manual.- Control manual.- Unit wiring diagram- Key to the wiring diagram.- Dimensional drawing with connection diagram- Additional diagrams depending on options.3 - SAFETY INSTRUCTIONSAppropriate PPE (personal protection equipment)is required for any servicing operations on the unitsWarningThe unit must be installed and maintained by a qualified, experienced technician. Follow the operating precau-tions to the letter when working on the unit.Labels have been placed on the unit to remind you of the safety instructions.As a general rule, follow all applicable safety regulations and standards.4 - WARRANTYSee the general terms and conditions of sale5 - STORAGE OF EQUIPMENTThe unit must be stored in a dry, sealed area, away from moisture and frost. The temperature in this area must not exceed 50°C .6 - HANDLINGThe unit must be handled either with a pallet truck or using a spreader beam and slings. This operation must be carried out by qualifiedpersonnel. Refer to the information given on the relevant label on the unit.Important: The unit must be handled with care and kept upright.In all cases, the unit must be raised by its base.Handling with a pallet truck= =4