53 KLN 009/012 - 53 QNL 009/012GB - 14Discharge air louver controlUp and Down ControlThe air discharge direction can be controlled to swing up and down and can be fixed at preferred position or Automatic position by theremote controller.Unit operation• If you select the Flap position using FLAP button in the remotecontroller, the flap in the unit will move to that positionautomatically. Once you select the position, unit remembers thatposition and whenever you turn on the unit, the flap will bepositioned to that position.• If you select SWING, the flap will swing up and down. In theCOOL, DRY, FAN mode, the flap will swing in the cool range. Inthe HEAT mode, the flap will swing in the heat range.• If you select AUTO, the flap will position to the preset positionaccording to the operation mode.NOTE:1. Always use the remote controller to adjust the flap position,otherwise it may cause abnormal operation. Please turn offthe unit and turn on again when you adjust the flap out ofrange manually.2. When you adjust the flap manually, follow the indicatinglabel in the left side of flap. The blue zone is for COOL andDRY modes, the red zone is for HEAT mode.3. The unit can have maximum capacity when the flap locate atd position or black line in the label of unit.Left and Right ControlIf you want to adjust the direction of discharge air left and right,adjust the vertical louver with the handle after opening the flap. NOTE:• Please do not fix the flap vertically for a long time.• Please avoid the discharge air being directed towards theoccupants for a long time.• Do not adjust the flap by the hand during AUTO SWINGoperation because it may damage the air swing function.6230°60°AUTOSWINGFLAP1 2 3 456123456123456Remole controller Fixed Swing Range Auto PositionCLOSECOOLHEATCOOLHEATHANDLE