T-363 4–189. Suction modulation valve percentage10. Discrete outputs (See Note )11. Discrete inputs (See Note )12. Ambient sensor13. Compressor suction sensor14. Compressor discharge sensor15. Return temperature sensor16. Supply temperature sensor17. Defrost temperature sensor18. Discharge pressure transducer19. Suction pressure transducer20. Condenser pressure transducer4.8.3 Logging Interval (dCF03)The user may configure four time intervals between data recordings. Data is logged at exact intervals in accordancewith the real-time clock. The clock is factory set at Greenwich Mean Time.4.8.4 Thermistor Format (dCF04)The user may configure the format in which the thermistor readings are recorded. The low resolution is a 1 byte formatand the normal resolution is a 2 byte format. The low resolution requires less memory and records temperature in0.25°C (0.45° F) increments when in perishable mode or 0.5 ° C (0.9°F) increments when in the frozen mode. The normalresolution records temperature in 0.01° C (0.02°F) increments for the entire range.Table 4–2 Data CORDER Configuration VariablesCONFIGURATION NO. TITLE DEFAULT OPTIONdCF01 (Future Use) -- --dCF02 Sensor Configuration 2 2,5,6,9,54,64,94dCF03 Logging Interval (Minutes) 60 15,30,60,120dCF04 Thermistor Format Short Low, NormaldCF05 Thermistor Sampling Type A A,b,CdCF06 Controlled Atmosphere/Humidity Sampling Type A A,bdCF07 Alarm Configuration USDA Sensor 1 A Auto, On, OffdCF08 Alarm Configuration USDA Sensor 2 A Auto, On, OffdCF09 Alarm Configuration USDA Sensor 3 A Auto, On, OffdCF10 Alarm Configuration Cargo Sensor A Auto, On, Off
