Carrier AQUAFORCE 30XA080-500 Product Data

Also see for AQUAFORCE 30XA080: Installation instructions Controls, start-up, operation, service and troubleshooting instructions Installation instructions Controls, start-up, operation, service and troubleshooting instructions

Carrier AQUAFORCE 30XA080-500 Product Data Manual pdf 14 page image

14Dimensions (cont)5" VictaulicLeaving Water5" VictaulicEntering Water90.55[2300]19.06[484] 10.8[274]88.04[2236]68.06[1729]Cooler TubeService AreaPipingEntrance7/8" knockouts for main power entry(7.48" [190mm] hole spacing)Control Box All Voltages88.04[2236]68.06[1729]188.2[4780]120.85[3070]109.0[2769]5.51 [140]23.72[602]BAEND VIEW TOP VIEW30XA090-120NOTES:1. Unit must have clearances as follows:Top — Do not restrictSides and Ends — 6 ft from solid surface.2. Temperature relief devices are located on liquid line and econo-mizer assemblies and have 1/4-in. flare connection.3. 3/8-in. NPT vents and drains located in each cooler head at eachend of cooler.4. Drawing depicts unit with single-point power and standard two-pass cooler. Refer to the Packaged Chiller Builder program forother configurations.5. Dimensions are shown in inches; dimensions in brackets are inmillimeters.30XA UNIT A B090 44.11 (1120) 86.93 (2208)100 44.11 (1120) 87.22 (2215)110 44.11 (1120) 87.62 (2226)120 44.11 (1120) 87.12 (2213)