Carrier AQUASMART 42WHC Installation Manual

Contents

Carrier AQUASMART 42WHC Installation Manual Manual pdf 7 page image

42 WHC/AQUASMARTGB - 6Hanging panelInstalling the hanging panelBear in mind the minimum space from the walls to the ceiling (seeminimum space).Hold the fixing plate to the wall.Level the plate with a plumb line or spirit level and mark the 4 holes to be made.Drill and fix the plate to the wall (No. 4 anchors).Check that the plate is fixed correctly (No. 4 screws) to prevent anyvibration. Holes for fixing panel Passage holes for connection pipes Passage hole for electric control cables and condensate drain pipeInstallation panelHanging panel with valves(dimensions mm)790282 (016-020)45320 (028)Hanging panel with water valve Hanging panel with water valveThe panel contains: water shut-off valves with 3/4” female GAS threaded fitting forconnection to the water system; thermo-electric valve piloted by the room thermostat control; terminal board valve connection;unit support chain; this permits the unit to be swung downwardsthrough 90° facilitating installation;flexible pipes with threaded fitting for the unit hydraulic connection;The system side hydraulic connections are made inside thehanging panel, using the 3/4” female GAS threaded fitting of theshut-off valves.The unit is then connected to the valve group using the flexiblepipes supplied in the hanging panel.NOTE:Make certain the pipe insulation reaches as far as the valve.The water fittings are fixed to the hanging panel structure toprevent breakage when the pipes are connected; we advisekeeping the fittings still using a spanner.Water connectionsHanging panel dimensionsHeight Width Depth Volume withPanel type packagingmm mm mm m 3With water valve 282 / 320 790 45 0.025Hanging panel weight Panel weight Panel weight withPanel type packagingkg kgWith water valve 5 5.5