Carrier Aquaforce 30XA302 Installation, Operation And Maintenance Instructions

Also see for Aquaforce 30XA Series: Installation instructions Operation instructions User guide

Contents

3530XA with configuration: Leaving water controlLegendMaster unitSlave unitControl boxes of the master and slave unitsWater inletWater outletWater pumps for each unit (included as standard for units with hydronicmodule)Additional sensors for leaving water control, to be connected to channel 1 ofthe slave boards of each master and slave unitCCN communication busConnection of two additional sensors1 2Low-pressure pumps (options 116F/116G)7.7 - Pump characteristics7.7.1 - Available external static pressure (hydronic module option)Available static pressure, kPaWater flow rate, l/sHigh-pressure pumps (options 116B/116C)High-pressure pumps (options 116B/116C)Available static pressure, kPaWater flow rate, l/sNPSH required, kPa abs.Water flow rate, l/sNPSH required, kPa abs.Water flow rate, l/s7.7.2 - Net positive suction head (NPSH) required, hydronicmodule optionSize the hydronic circuit to ensure a net positive suctionhead that is higher than or equal to the required NPSH +50 kPa.Data applicable for:- Fresh water 20 °C- In case of use of the glycol, the maximum water flow isreduced.- When the glycol is used, it’s limited to 40%.Low-pressure pumps (options 116F/116G)Data applicable for:- Fresh water 20 °C- In case of use of the glycol, the maximum water flow is reduced.- When the glycol is used, it’s limited to 40%.1230235240245225250202550751001251501752003 5 7 9 11 13 15 17 19 21 23 25 27 29302352402 452252 50250751001251501752002252502753003253503754003 5 7 9 11 13 15 17 19 21 23 25 27 29 31352402452 -502252-302010203040506070803 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35302 - 352402452-5022520204060801001203 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35