Carrier Aquaforce 30XA302 Installation, Operation And Maintenance Instructions

Also see for Aquaforce 30XA Series: Installation instructions Operation instructions User guide

Contents

409.2.6 - 30XA 1002 - heat reclaim optionATTENTION: The condenser connection sleeves are notinstalled, but supplied with the unit. The sealing joints arein the control box. The temperature sensors and thecondenser flow switch are wired and fixed in the machine.They must be installed as described in the chapter“Condenser water connections”.NOTES:- Drawings are not contractually binding.- Before designing an installation, consult the certifieddimensional drawings, available on request.- For the positioning of the fixing points, weight distribu-tion and centre of gravity coordinates please refer tothe dimensional drawings.- If the installation includes several units or if this(these) is (are) close to walls, please refer to chapters3.11 - “Multiple chiller installation” and 3.12 -“Distance to the wall” of this document to determinethe space required.LegendAll dimensions are given in mm.Required clearances for maintenance (see note)Recommended space for evaporator tube removalWater inlet for standard unitFor options 5, 6, 100A, 100C, 107 refer to the certified drawing.Water outlet for standard unitFor options 5, 6, 100A, 100C, 107 refer to the certified drawing.Air outlet – do not obstructPower supply and control connectionControl circuit connection for option 158Heat reclaim condenserCA