Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.Catalog No. 04-53480208-01 Printed in U.S.A. Form IIK-CRECOMZR77-03 Pg 1 11-18 Replaces: NEWInstallation InstructionsP/Ns CRECOMZR077A00, CRECOMZR079A00,CRECOMZR081A00CONTENTSSAFETY CONSIDERATIONS . . . . . . . . . . . . . . . . . 1GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1ACCESSORIES LIST . . . . . . . . . . . . . . . . . . . . . . . . 3INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3INSTRUCTIONS FOR 48/50LC07-12 UNITS ONLY . . . . . . . . . . . . . . . . . . . . . . 11Installing Optional HH57AC081 Single Outside AirEnthalpy Sensor . . . . . . . . . . . . . . . . . . . . . . . . 14Installing Differential Return Air Sensor . . . . . . . 15California’s Title 24 High Temperature LimitSettings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Demand Controlled Ventilation (DCV) . . . . . . . . . 15Remote (Downstairs) Monitoring of Controller’sFault Detection and Diagnostics . . . . . . . . . . . 16GENERAL JADE W7220 CONTROLLER ANDSENSOR INFORMATION . . . . . . . . . . . . . . . . . 17W7220 Economizer . . . . . . . . . . . . . . . . . . . . . . . . 17User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Using the Keypad with Menus . . . . . . . . . . . . . . . 17Using the Keypad with Settings and Parameters 17Menu Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Programming the Jade W2770 Controller . . . . . . 17• SETPOINTS• SYSTEM SETUPCheckout Tests . . . . . . . . . . . . . . . . . . . . . . . . . . . 23SETUP AND CONFIGURATION . . . . . . . . . . . . . . 23W7220 Economizer Module Wiring . . . . . . . . . . . 23Time-out and Screen Saver . . . . . . . . . . . . . . . . . 24START-UP AND OPERATION . . . . . . . . . . . . . . . . 24Cooling with EconoMi$er X . . . . . . . . . . . . . . . . . 24Heating with EconoMi$er X . . . . . . . . . . . . . . . . . 24TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . 25Power Loss (Outage or Brownout) . . . . . . . . . . . 25Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25• CLEARING ALARMSSAFETY CONSIDERATIONSInstallation of this accessory can be hazardous due to systempressures, electrical components and equipment, and equip-ment locations (such as a roof or elevated surface). Onlytrained qualified installers and service technicians should in-stall, start-up, and service this equipment.When installing this accessory, observe precautions in the litera-ture and on any labels attached to the equipment and all other safe-ty precautions may apply.• Follow all safety codes• Wear safety glasses and work gloves• Use care in handling and installing the accessoryIt is important to recognize safety information. This is the safety-alert symbol . When you see this symbol on the unit and in in-structions or manuals, be alert to the potential for personal injury.Understand the signal words DANGER, WARNING, CAU-TION, and NOTE. These words are used with the safety-alertsymbol. DANGER identifies the most serious hazards whichwill result in severe personal injury or death. WARNING signi-fies hazards which could result in personal injury or death.CAUTION is used to identify unsafe practices, which may re-sult in minor personal injury or product and property damage.NOTE is used to highlight suggestions which will result in en-hanced installation, reliability, or operation.GENERALWARNINGELECTRICAL SHOCK HAZARDFailure to follow this warning could cause personal injuryor death. Before performing service or maintenance opera-tions on the unit, always turn off main power switch to unitand install lock(s) and lockout tag(s). Unit may have morethan one power switch. Ensure electrical service to rooftopunit agrees with voltage and amperage listed on the unit rat-ing plate.CAUTIONCUT HAZARDFailure to follow this caution may result in personal injury.Sheet metal parts may have sharp edges or burrs. Use careand wear appropriate protective clothing, safety glasses andgloves when handling parts and servicing roof top units.CAUTIONFailure to follow this caution may result in personal injuryand damage to the unit. Cover the duct opening as a precau-tion so objects cannot fall into the return duct opening. Besure to remove the cover when installation is complete.IMPORTANT: These economizers meet all the economizerrequirements as laid out in California’s Title 24 mandatorysection 120.2 (fault detection and diagnostics).Small Rooftop ProductsSelect 3 to 12 ½ Tons(48/50LC 14 Not Included)Horizontal EconoMi$er X Accessory