Carrier Elite Plasma Green 53QHET12-708J Owner's Manual

Also see for 53KHET 12: Installation manual

( 7 )REMOTE CONTROL INSTALLATION (Cont.)5-2 INSTRUCTIONS OF USING WIRELESS REMOTE CONTROL1- The remote control must be directed toward the receiver of indoor unit when pressing the buttonsof the desired functions. An acoustical acknowledgement sound (beep) will indicate that signal hasbeen received.2- Avoid direct sunlight on the receiver of indoor unit, which may interfere with good signal receptionand the air conditioner may not work properly. Draw the curtains to avoid direct sunlight.3- Avoid obstacles obstructions such as curtains, doors or other materials between the remote controland the receiver of indoor unit to avoid blocking the signals from the remote control to the indoor unit.4- The maximum operating distance for the remote control is approximately 8 meters.5- Keep the remote control away from water. Do not let the remote control fall down.6- Never use objects with sharp point to press the button on the remote control.7- Prevent any liquid from falling into the remote control.8- If other electric applications react to the remote control, move these applications.8. DESCRIPTION OF EMERGENCY BUTTONEMERGENCY FUNCTIONEmergency function can be used temporarily in case you cannot find the remote control or its batteries areexhausted.To perform Emergency function, follow below steps :1. Open and lift the front panel up to an angle untilit remains fixed with a clicking sound.2. Press manual control button ( AUTO / COOL )until AUTO led AUTO illuminates on the displaypanel of the indoor unit.then the unit will work in forced AUTO mode(the default setting temperature is 24°C).3. Close the panel firmly to its original position.CAUTION• Once you press the manual control button( AUTO / COOL ), the operation mode is shiftedin an order as :AUTO → Forced COOL → OFF• Push the manual control button to operate in forced COOLmode, this is used for testing purposes only.You had better not choose it.• The Forced COOL mode is used only for testingpurposes by the installer and serviceman.• To restore the remote control operation, use the remotecontroller directly.Remotecontrol8 meterFront panel