( 10 )USE OF REMOTE CONTROL (Cont.)HEAT MODESTART1. Press MODE button to select HEAT modeon the remote control display.2. Press TEMP buttons or to select the settemperature on the remote control display.Set desired temp. between 17°C and 30°C.3. Press FAN SPEED button to selectthe desired fan speed appearson the remote control display.4. Press ON/OFF button to startthe air conditioner.ON symbol appears on theremote control display.OPERATION led will illuminateon the display panel of indoor unit.HEAT mode starts after approximately 3 minutesand Plasma operates for refeshing air, removingsmoke and dust particles. Plasma gives animmediate sensation of energy and well-being.STOPIf you want to stop the air conditioner,Press ON/OFF button again.NOTES• If the room temperature is lower thanthe selected temperature, the system will start HEAT mode.• If the room temperature is equal to or higher thanthe selected temperature, the system will stop HEAT mode.• If you use AUTO fan speed with HEAT mode, the fan speedchanges automatically to low or medium or high speedbased on the temperature difference between settingtemperature and room temperature.4 2213