Carrier SYSTXCCUID01-B Installation Instructions Manual

Also see for Infinity SYSTXCCUID01-B: Installation instructions

Contents

Carrier SYSTXCCUID01-B Installation Instructions Manual Manual pdf 8 page image

88. Press the red HEAT button to select heating humidity.9. Adjust desired heating humidity level using either (+/--) but-ton.10. Press the blue COOL button to select cooling humidity.11. Adjust the desired cooling humidity level using ei-ther(+/--)button.12. To exit press BASIC button or close door.13. If changes are made, you will be asked to “SAVECHANGES? YES/NO.”Override Heating Schedule1. Press the red HEAT button. Heating mode is confirmedwhen the red LED next to the red HEAT button is lit.2. Use the TEMP (+/--) button to select your desired heatingtemperature.3. The default time for temporarily overriding the temperatureschedule is 2:00 HRS as indicated by the text on the lowerleft.NOTE: Override time will not appear if programming has beenturned off.4. You can change the temporary override time in 15--minuteincrements by pressing the TIME (+/--) button until the de-sired override time is selected, or press the HOLD buttonanytime to override the schedule indefinitely.Quick Program Schedule For All DaysThis section will give you a quick program schedule for ALLDAYS of the week. For more information on how to createcustomized schedules for every day, the entire week, or weekend,refer to the Owner’s Manual.1. Flip down the door at the bottom of the control.2. Press the SCHEDULE button, which allows you to createone schedule for the entire home.3. Press either the LEFT or RIGHT side button repeatedly (ifnecessary) until “ALLDAYS” is displayed. The WAKEtime period will be highlighted.4. Using the TIME (+/.) button, set the start time for this timeperiod.5. Press the red HEAT button. Heating temperature will beginflashing.6. Set the heating temperature using the TEMP (+/.) button.7. Press the blue COOL button. Cooling temperature will be-gin flashing.8. Set the cooling temperature using the TEMP (+/.) button.9. Set the remaining periods by using the SCROLL button toselect “DAY”, “EVENING”, and “SLEEP”.10. Exit the scheduling mode by either closing the door orpressing the SCHEDULE button.11. If changes are made, you will be asked to “SAVECHANGES YES/NO.”INSTALL / SERVICE MENUSThe “INSTALL / SERVICE” menus contain a set of vitalinformation. This information enables the Installer or Serviceperson to view a summary of what has been installed, etc. Thisinformation is not covered in the Owner’s Manual.To enter INSTALL / SERVICE menus, press and hold theADVANCED button for at least ten seconds. The following menuwill appear (See Fig. 22):INSTALL/SERVICEEQUIPMENT SUMMARYINSTALLSETUPCHECKOUTSERVICESOFTWARE VERSION 1EXIT SELECTA03200Fig. 22 -- Install / Service MenusNOTE: The INSTALL / SERVICE menu will automatically exitafter 60 minutes of no push button activity.EQUIPMENT SUMMARY: Shows all equipment recognized byand attached to the system.INSTALL: Used when adding, changing out, or un--installingequipment.SETUP: Used to view or modify equipment settings.CHECKOUT: Allows testing of equipment operationSERVICE: Used to view operation and fault history of equipmentand enter dealer name/phone number for displayEQUIPMENT SUMMARY MENUThis screen shows indoor unit type and model number, outdoorunit type (and model number if a 2--stage unit), filter type and anyaccessories that are installed are recognized. See Fig. 23.EQUIPMENT SUMMARYFURNACE 58MVB0100-12AC 24ANA136A003FILTER EACHUMIDIFIER YESUV LIGHTS YESNO YESA07025Fig. 23 -- Equipment SummaryINSTALL MENUThis menu item will perform start--up process in order to learn allequipment in system. Press right side button to initiate the process.See Fig. 24.INSTALLTO ADD, UNINSTALL ORRE-INSTALL EQUIPMENT,PRESS RIGHT SIDEBUTTONBACK INSTALLA03202Fig. 24 -- Install MenuCCUID01-- B