Carrier VVT 33ZCVVTZC-01 Installation, Start-up And Configuration Instructions

Also see for 3V VVT 33ZCVVTZC-01: Installation and start-up instructions

Carrier VVT 33ZCVVTZC-01 Installation, Start-up And Configuration Instructions Manual pdf 45 page image

45Table 18 — Time Schedule Maintenance TableUNOCCUPIED START TIME — This variable displays thetime that the current occupied mode will end (the beginning ofthe next unoccupied mode).Unoccupied StartTime: Display Range 00:00 to 24:00Network Access NoneNEXT OCCUPIED DAY — This variable displays the daywhen the next occupied period is scheduled to begin. Thispoint is read in conjunction with the next occupied time toallow the user to know the next time and day when the nextoccupied period will occur.NOTE: If the current mode is occupied, this point makes refer-ence to the next occupied period and, in most cases, may notbe the same as the current occupied start time.Next OccupiedDay: Display Range MON, TUE, WED,THU, FRI, SAT, SUNNetwork Access NoneNEXT OCCUPIED TIME — This variable displays the timeof day when the next occupied period will occur. This point isread in conjunction with the next occupied day to allow theuser to know the next time and day when the zone will becomeoccupied.NOTE: If the current mode is occupied, this point makesreference to the next occupied period and, in most cases,may not be the same as the current occupied start time.Next OccupiedTime: Display Range 00:00 to 24:00Network Access NoneNEXT UNOCCUPIED DAY — This variable displays theday when the next unoccupied period is scheduled to begin.This point is read in conjunction with the next unoccupied timeto allow the user to know the next time and day when the zonewill become unoccupied.NOTE: If the current mode is unoccupied, this point makesreference to the next unoccupied period and, in most cases,may not be the same as the current unoccupied start time.Next UnoccupiedDay: Display Range MON, TUE, WED,THU, FRI, SAT, SUNNetwork Access NoneNEXT UNOCCUPIED TIME — This variable displays thetime of day when the next unoccupied period is scheduledto begin. This point is read in conjunction with the nextunoccupied day to allow the user to know the next time andday when the zone will become unoccupied.NOTE: If the current mode is unoccupied, this point makesreference to the next unoccupied period and, in most cases,may not be the same as the current unoccupied start time.Next UnoccupiedTime: Display Range 00:00 to 24:00Network Access NoneLAST UNOCCUPIED DAY — This variable displays thelast day when the zone changed from occupied to unoccupiedmode. This point is read in conjunction with the last unoccu-pied time to allow the user to know the last time and daywhen the zone became unoccupied.Last UnoccupiedDay: Display Range MON, TUE, WED,THU, FRI, SAT, SUNNetwork Access NoneLAST UNOCCUPIED TIME — This variable displays thelast time of day when the zone changed from occupied to unoc-cupied mode. This point is read in conjunction with the lastunoccupied day to allow the user to know the last time and daywhen a zone became unoccupied.Last UnoccupiedTime: Display Range 00:00 to 24:00Network Access NoneSystem Commissioning Maintenance Table —The System Commissioning Maintenance Table (SYSTCOMM)displays and permits the setting of all dampers in the linked sys-tem from the Linkage Coordinator zone controller. The bypasscontroller damper position, system pressure and pressure setpoint are also displayed and the pressure set point may be altereddirectly from this table. See Table 19.COMMISSIONING MODE — This variable is used to putthe master zone controller into the commissioning mode. Forcethis point to enable. The Linkage Coordinator zone controllerwill be ready to accept a command to perform the tests andfunctions on this screen. The Linkage Coordinator zone con-troller will go into ZONE_BAL mode.NOTE: If this zone controller is not the Linkage Coordinator,enabling this variable will have no effect.CommissioningMode: Display Range Disable/EnableDefault Value DisableNetwork Access Read /WriteDESCRIPTION VALUE UNITS NAMEMode 1 MODECurrent Occupied Period 2 PERIODOverride in Progress No OVERLASTOverride Duration 0 min OVERDURAOccupied Start Time 08:00 OCCSTARTUnoccupied Start Time 18:00 UNSTARTNext Occupied Day Thu NXTOCCDNext Occupied Time 00:00 NXTOCCTNext Unoccupied Day Wed NXTUNODNext Unoccupied Time 18:00 NXTUNOTLast Unoccupied Day PRVUNODLast Unoccupied Time 00:00 PRVUNOT