Carrier ZS Plus Installation Manual

Also see for ZS Plus: Application guide Installation guide User guide Installation guide

Contents

Carrier ZS Plus Installation Manual Manual pdf 15 page image

TroubleshootingZS Pro or ZS Pro-FIf display shows... Then...Incorrect or missingvaluesCheck for errors in the i-Vu® application and Snap.On the control program's Properties page, select the Rnet Points tab.Verify that values coming in from the sensors and those going out to thesensors are expected values.In the i-Vu® application, double-click the Sensor Binder and ASVImicroblocks to check for problems in the Status and/or Error columns.If the Error column shows Resource Allocation, try formatting thesensor (page 12). If the error is not corrected by formatting, the controlprogram engineer should reduce the number of items that the sensor istrying to display.Nothing The sensor has no power.The sensor is not communicating with the network. Check:• Software/addressing setup• Wiring connections• Controller operating statusCharacters thatseem outof placeThe sensor may have a memory problem. Try formatting the sensor(page 12).TroubleshootingZS Sensors Carrier Proprietary and Confidential CARRIER CORPORATION ©2013Rev. 11/14/2013 All rights reserved11

/ 18

Related manuals for Carrier ZS Plus