Carus Adapto CAI1100 Product Information

Carus Adapto CAI1100 Product Information Manual pdf 3 page image

3Scope of delivery1 x CAI11x0 (top shell, bottom shell or tabletop device)2 x release bracket4 x Phillips head screw4 x dowelassembly instructionProduct informationinstruction manualprogramming tableSafety instructionsGeneral safety regulations! Attention! Assembly, installation, commissioning and repair of electronic devices mustbe carried out by qualified electricians and in compliance with the current standards.When working on main power connections of 230V AC, the general and regional installa-tion and safety regulations must be met. i.e. DIN VDE 0100TCS:BUS system installations must be in compliance with the general safety regulationsfor telecommunication systems according to VDE 0800. Including separated cable routing of high and low voltage lines, minimum distance of 10 cm in case of a common cable routing, use of separators between high and low voltage lines within shared cable ducts, use of standard telecommunication lines, e.g. J-Y (St) Y with 0.8 mm diameter, already existing lines (modernisation) with deviating cross-sections can be used incompliance with the loop resistance.Installation – protective measures! Through suitable measures to protect against lightning, it has to be ensured that avoltage of 32 V DC is not exceeded at each connection.