Cascade TEK TVO-2 Installation And Operation Manual
Also see for TVO-2: Instruction manualInstallation and operation manual
                                                              | |
22 | P a g eINSTALLATIONShelving Installation ContinuedTVO-5 ShelvingTo ensure accurate temperature measurement, one shelf bottom must be in close proximity to theoven temperature probe. This probe extends out from the chamber back wall. Do not place theshelf in direct contact with the probe.1. Install the shelf clips in the slots of the shelf standard mounting rails located on the sides ofthe chamber interior, 4 clips per shelf.a. Squeeze each clip, insert the top tab first, and then the bottom tab using arocking motion.2. Set the shelves on the clips.a. Verify the shelves are level.Rocking MotionProbe ShelfInstall 4 Shelf ClipsPlace the Shelf |
manualsdatabase
Your AI-powered manual search engine