Casio CE-T300 Service Manual
Also see for CE-T300: Dealer's manualUser manualService manual
                                                                                 | |
Contents
| 
- 18 -2) Multi-drawer kit (CE-T300 only Drawer 2)2-1. Prepare the following parts kit for multi-drawer circuit. The parts kits are supplied from salesdivision.MDL-10 Multi-drawer kit2-2. Check whether the parts of clerk kit are as follows:2-3. Connect the drawer connector cable to the main PCB by solder.Drawer2 Not used Not usedRedBrownBlack2-4. Open the back cover of lower cabe to release the 2 screws. Then, connect the necessaryextension cable for drawer. In this case, do no forget to fix the FG wire of the extensioncable to the frame ground by the screw.Release the 2 screws and open theback cover of lower case. Connect the extensiondrawer cable to thedrawer connector.Fix the FG wire of theextension drawer cable byscrew of the parts kit.2-5. Connect 1 pin FG connector of the drawer extension cable to the drawer 1 pin connector.Close the back cover of lower case by 2 screws.Code No. Parts Name Specification Q'ty10006121 Drawer connector cable E440721A*1 162481534 Extension cable for Drawer E440714*1 159000209 Screw 3X4ZMC-3. 1 |
Related manuals for Casio CE-T300
manualsdatabase
Your AI-powered manual search engine