Casio CTK-671 User Manual

Also see for CTK-671: Midi implementation Service manual Service manual

Contents

Casio CTK-671 User Manual Manual pdf 47 page image

E-45703A-E-047ASetup NamesYou can assign setups into one of 16 areas, which you canselect using BANK buttons 1 through 4 and the four REGIS-TRATION buttons. Area names range from 0-1 through 3-4as shown below.1 Use the BANK button to select the bank. Each press ofBANK cycle through the bank numbers from 0 to 3.2 Pressing one of the REGISTRATION buttons (1 to 4) se-lects the corresponding area in the currently selected bank.❚ NOTE• Whenever you save a setup and assign it a setup name, anysetup data previously assigned to that name is replaced withthe new data.• You can use the keyboard’s MIDI capabilities to save your set-up data to a computer or other external storage device. See“Using the Data Download Service” on page E-68 for details.To Save a Setup in RegistrationMemory1. Select a tone and rhythm, and otherwise set upthe keyboard the way you want it.• See “Registration Memory Settings” on page E-44 fordetails on what data is stored in the registration mem-ory.2. Use the BANK button to select the bank youwant.• If you do not perform any operation for about fiveseconds after pressing the BANK button, the displayreturns to the contents in step 1, above.• Bank 1 selected.BANK STORE210-1 0-2 0-3 0-41-1 1-2 1-3 1-43-1 3-2 3-3 3-42-1 2-2 2-3 2-41 2 3 4BANK 0BANK 1BANK 2BANK 3B a n kS t o r e3. While holding down the STORE button, press aREGISTRATION button (1 to 4).• The following display appears when you press the 2button.4. Release the STORE and REGISTRATION buttons.❚ NOTE• The setup is saved as soon as you press a REGISTRATIONbutton in step 3, above.To Recall a Setup from RegistrationMemory1. Use the BANK button to select the bank.• If you do not perform any operation for about fiveseconds after pressing the BANK button, the keyboardautomatically clears the registration memory recallscreen.2. Press the REGISTRATION button (1 to 4) for thearea whose setup you want to recall.• The setup name along with the message “Recall” ap-pears on the display.❚ NOTE• If you press a REGISTRATION button without using the BANKbutton to select a bank first, the last bank number selected isused.B a n kR e c a l l