Casio CTK-671 User Manual

Also see for CTK-671: Midi implementation Service manual Service manual

Contents

Casio CTK-671 User Manual Manual pdf 57 page image

E-55703A-E-057ATo delete specific note data1. Perform steps 1 and 2 under “To correct mis-takes while step recording” above to display thenote you want to delete.2. Press the [] (ENTER) button.3. In response to the “Delete?” message that ap-pears on the screen, press the YES button to de-lete the displayed note.Editing Memory ContentsAfter you record to keyboard memory, you can recall indi-vidual notes and parameter settings (such as tone number)and make any changes you want. This means you can cor-rect misplayed notes, make changes in tone selections, etc.The following types of data can be edited.• Note intensity• Notes• Chords• Tone numbers• Rhythm number• INTRO/ENDING 1 button, INTRO/ENDING 2 button,VARIATION/FILL-IN 1 button, VARIATION/FILL-IN 2button, SYNCRHO/FILL-IN NEXT button operationsTo edit memory contents1. Press the SONG MEMORY button three times toenter step recording standby, and then use the[+] and [–] buttons to select either 0 or 1 as thesong number.2. Use the SONG MEMORY TRACK buttons to se-lect the recorded track that you want to edit.3. Press the [] (CURSOR) button to enter the ed-iting mode.• The REC indicator disappears from the display, andthe STEP indicator flashes.FlashS t e p R e c4. Use the [] and [] (CURSOR) buttons to moveto the location in track where the note or pa-rameter you want to change is located.Note editing example5. Make any changes in the value that you want.• The actual procedures you use to change a parameterdepend on the type of data it contains. See “EditingTechniques and Display Contents” on page E-56 fordetails.6. Repeat steps 4 and 5 to edit other parameters.7. Press the START/STOP button to end editingwhen you are finished.❚ NOTE• The only parameters that can be editted for Tracks 2 through 6are notes and tone numbers.• In the case of real-time recording, you later can change tonenumbers you specified while recording to Tracks 1 through 6 isin progress.• You can only change tone numbers that were originally set forTracks 2 through 6 using step recording.• In the case of real-time recording, you later can change rhythmnumbers you specified while recording to Track 1 is in progress.• You can only change rhythm numbers that were originally setfor Track 1 using step recording.• You cannot use the edit procedure to add more data to a re-cording.• You cannot move portions of a recording to a different locationwithin the recording.• Note lengths cannot be changed.N o t e C 4PitchVelocity Parameter beingedited