Casio CTK-900 Midi Implementation Manual

Also see for CTK-900: User guide Service manual

Contents

Casio CTK-900 Midi Implementation Manual Manual pdf 24 page image

2412 Program ChangeFormatSendSent when a tone is selected. See the "Tone List" of this Model's User's Guide for details about program numbers.ReceiveReceipt changes the tone of the part corresponding to the MIDI Channel.The selected tone is determined by the program value of this message and the Bank Select message value receivedprior to this message. See the "Tone List" in this Model's User's Guide for information about actually selectingtones, etc.Also note that receipt of this message may also change the Part Mode parameter at the same time. For moreinformation, see "12.1 About the Part Mode" below.12.1 About the Part ModeEach of this Model's parts has a parameter called "Part Mode," which can be set to Normal Mode, Drum Mode,or Drawbar Organ Mode. Melody tones are set to Melody Mode, rhythm tones that use the drum map are set tothe Drum Mode, and drawbar organ tones are set the to Drawbar Organ Mode.13 Channel AftertouchFormatSendThese messages are never sent.ReceiveReceipt of this message adds vibrato to the voice that is sounding. Details of the effect differ according to thetone setting.14 Pitch BendFormatSendSent when the bender wheel is operated (WK-3200/WK-3700 only).Also sent when play data or auto-accompaniment data that includes bender wheel data is played back.ReceiveReceipt changes the pitch of the currently sounding note. The width of the change depends on the setting of theTranspose/Function's Bend Range parameter and the Pitch Bend Sensitivity, whose setting is configured by RPN.Message Format: CnH ppHn: MIDI Channel Numberpp: Program NumberMessage Format: DnH vvHn: MIDI Channel Numbervv: ValueMessage Format: EnH llH mmHn: MIDI Channel Numberll: Value LSBmm: Value MSB