Casio CTK2100ES1A User Manual

Also see for CTK-2100: Product catalog Implementation guide Appendix

Casio CTK2100ES1A User Manual Manual pdf 6 page image

General GuideE-4Use the number buttons and the [–] and [+] buttons to changethe settings of the parameters that appear in the upper leftarea of the display.Use the number buttons to enter numbers and values.• Enter the same number of digits as the currently displayedvalue.Example: To enter tone number 005, input 0 3 0 3 5.• Negative values cannot be input using the number buttons.Use [+] (increase) and [–] (decrease) instead.You can use the [+] (increase) and [–] (decrease) buttons tochange the displayed number or value.• Holding down either button scrolls the displayed setting.• Pressing both buttons at the same time will revert to theinitial default setting or the recommended setting.Use the Setting button (3) to access settings that let youselect the reverb type, pedal effect, etc.1. Press 3.2. Next press 3 until the parameter whose settingyou want to change is displayed.Each press of 3 cycles through the available parameters.3. When the parameter you want is displayed, usebn (10-key) to change its setting.• The parameter setting will disappear from the upper leftarea of the screen if you do not perform any operationfor some time.• The tone and other parameters revert to their initialdefaults whenever you turn on power (page E-6).Using the 10-key Pad (bn)Number Buttons[–] and [+] ButtonsM d e r n P n oSettingUsing the Setting Button (3)Parameter Display See Page1 Transpose Trans. E-112 Accompaniment Volume AcompVol E-313 Song Volume Song Vol E-174 Tuning Tune E-115 Reverb Reverb E-106 Voice Fingering Guide Speak E-227 Note Guide NoteGuid E-238 Performance Evaluation Scoring E-239 Phrase PhraseLn E-2310 Sampling Start SmplAuto E-1311 Keyboard Channel Keybd Ch E-3312 Navigate Channels Navi. Ch E-3313 Local Control Local E-3414 Accomp Out AcompOut E-3415 Pedal Effect Jack E-10T r a n s .ParameterSetting