63Screen is hard to readPocket PC Terminal screens without backlighting can be hard to read under reduced light.Position a lamp so that the light shines directly on the screen.If you’re having a hard time viewing a document in Notes, try changing the size of the view. Todo this, tap a zoom percentage on the Tools menu. In Pocket Word and Pocket Excel, on the Viewmenu, tap Zoom and then select a zoom percentage. In Pocket Internet Explorer, on the Viewmenu, tap Text Size and then select a size.If you’re having a hard time viewing Pocket Outlook data, try enlarging the display font. To dothis within Calendar, Tasks, or Contacts, tap Tools, then Options, and then select Use large font.Inaccurate response to stylus tapsAdjust the touch screen to respond more accurately to screen taps. Tap and then Settings. Onthe System tab, tap Align Screen. You can also launch the touch screen alignment procedure bypressing the Fn key and then pressing “4”.Slow or no responseReset the Pocket PC Terminal. See “Reset the Pocket PC Terminal and clear memory,” earlier inthis appendix.Infrared (IR) connection problemsIf you are unable to use IR to transfer information, try the following:• Transfer only one file or no more than 25 contact cards at a time.• Orient the IR ports so there is a straight, unobstructed path between, and so they are no furtherthan 20cm apart.• Make sure nothing is between the two IR ports.• Adjust the room lighting. Some types of light interfere with IR connections. Try moving to adifferent location or turning off some lights.Modem connection problemsYou may encounter the following problems when using a modem. Additional troubleshootinginformation is available in Connections Help on the Pocket PC Terminal and ActiveSync Help onthe desktop computer.Can’t dial out• Remove your Pocket PC Terminal from the cradle or disconnect the cable. You cannot connectusing a modem if your Pocket PC Terminal has an active connection with the desktopcomputer.• Verify that the modem is firmly seated and connected to your Pocket PC Terminal and thetelephone jack.• Make sure the telephone line is analog. (Analog telephone lines transmit data in analog insteadof digital form. Your home telephone line is most likely analog, while office telephone lines areoften digital.)• If you create a modem connection for an external modem, select Hayes Compatible on COM1as your modem. If you are using a modem card, select the modem card as your modem.• To use an external modem, you need to use a NULL modem cable and appropriate adapters toconnect the external modem to your Pocket PC Terminal.