Casio Celviano AP-500 User Manual

Also see for Celviano AP-500: Implementation guide Safety precautions

Contents

Casio Celviano AP-500 User Manual Manual pdf 26 page image

E-22Recording and Play BackAfter recording to either of the tracks of a song, you canrecord to the other track while listening to playbackwhat you recorded in the first track.To record to a specific track of a specificsong1. Press the RECORDER button so the PLAYlamp is lit.2. Use the /NO and /YES buttons todisplay a song number (1 to 5).3. Press the RECORDER button so the REClamp is flashing.• At this time the L/1 lamp will flash to indicate thatthe digital piano is standing by for recording to Track1.4. Use the PART/TRACK button to select thetrack to which you want to record.• Make sure that the lamp for the record track isflashing.Track 1: L/1 lampTrack 2: R/2 lampNOTE• If you want to record with rhythm or AutoAccompaniment, select Track 1 (L/1 lamp flashing).5. Select the tone and effects you want to use inyour recording, and set the tempo you want. Ifyou are recording to Track 1, you also canselect a rhythm and accompaniment mode.• Tone (page E-8)• Effect (page E-11)• Tempo (page E-14)z Track 1 only• Rhythm (page E-14)• Mode (page E-16)NOTE• It is a good idea to use a relatively slow tempo whenrecording.• If you want the metronome to sound during recording,press the METRONOME button.6. Start playing something on the keyboard.• Recording will start automatically.NOTE• When recording to Track 1 with rhythm or AutoAccompaniment: Press the START/STOP button to startrecording. You also can start recording by pressing theSYNCHRO/FILL-IN button and/or the INTRO/ENDING button, and then play a chord.• When recording to Track 1 without rhythm or AutoAccompaniment: Recording will start as soon as youplay anything on the keyboard.7. When you are finished, press the START/STOP button to stop recording.• To stop recording with a rhythm/AutoAccompaniment ending pattern, press the INTRO/ENDING button.• This will cause the REC lamp to go out and the PLAYlamp to light.• To play back the track you just recorded, press theSTART/STOP button again.8. After you are finished recording or playingback, press the RECORDER button so thePLAY lamp and REC lamp are off.Recording Your Keyboard PlayB