Using Auto AccompanimentE-40■ Using Synchro StartUse the following procedure to configure the Digital Keyboardto start Auto Accompaniment play as soon as you press akeyboard key.1. Press bl.This enters accompaniment start standby.2. Play a chord on the keyboard.This will start full part accompaniment (normal).Any of the following operations can be performed while insynchro standby to start a non-normal pattern.• To start with intro pattern, press 8.• To start with variation pattern play, press bk.Use the following procedure to change Auto Accompanimentspeed to a level that suits you.1. Press bo.Use y (slower) and t (faster) to change the temposetting. Holding down either button changes the setting athigh speed.• Pressing y and t at the same time will initialize thetempo setting in accordance with the currently selectedrhythm.• While the tempo value is flashing, you also can use bs(10-key) to change it.• If you do not perform any operation for a few secondsafter the tempo setting screen appears, the display willreturn to the screen displayed before you pressed bo.Use the following procedure to adjust the balance betweenwhat you are playing on the keyboard and the volume of theAuto Accompaniment.1. Press ct and then use the bs (10-key) [4] ( )and [6] ( ) keys to display “AcompVol” (pageE-6).2. Use the bs (10-key) [–] and [+] keys to adjust theaccompaniment volume.With One-Touch Preset, the Digital Keyboard automaticallyconfigures optimal tone, tempo, and other settings inaccordance with the rhythm pattern you select.1. Hold down bq until the current tone screenappears on the display.This will automatically apply the One-Touch Presetsettings in accordance with the rhythm pattern that iscurrently selected.2. Play a chord on the keyboard.This will start accompaniment automatically.Changing Auto Accompaniment Speed(Tempo)FlashesFlashesAdjusting the Accompaniment VolumeUsing One-Touch PresetA c o m p V o l