Casio Keyboard WK-500 User Manual

Also see for Keyboard WK-500: Product catalog User manual Appendix User guide User guide

Contents

EnglishReferenceE-71The metronome does not sound. • Check and adjust the accompaniment volume setting (page E-40).• Check and adjust the song volume (page E-28).• Turn power off and then back on to initialize all Digital Keyboardsettings (page E-9).Notes keep sounding, without stopping. • Turn power off and then back on to initialize all Digital Keyboardsettings (page E-9).• Replace the batteries with new ones or switch over to AC adaptorpower (page E-8).Some notes are cut off while they are playing. Notes are cut off whenever the number of notes being soundedexceeds the maximum polyphony value of 48 (24 for some tones).This does not indicate malfunction. See “Maximum Polyphony” in the“Tone List” in the separate “Appendix”.The volume or tone setting I made has changed. • Adjust the main volume setting (page E-9).• Turn power off and then back on to initialize all Digital Keyboardsettings (page E-9).• Replace the batteries with new ones or switch over to AC adaptorpower (page E-8).Output volume does not change even though ischange my keyboard touch.• Change the Touch Response setting (page E-10).• Turn power off and then back on to initialize all Digital Keyboardsettings (page E-9).In certain keyboard ranges, the volume and tonequality sound are slightly different from those in otherkeyboard ranges.This is due to system limitations. It does not indicate malfunction.With some tones, octaves do not change at the farends of the keyboard.This is due to system limitations. It does not indicate malfunction.The pitch of the notes does not match otheraccompanying instruments or sounds strange whenplayed long with other instruments.• Check and adjust the transpose (page E-15) and tuning settings(page E-15).• Turn power off and then back on to initialize all Digital Keyboardsettings (page E-9).The reverb of notes seems to change suddenly. • Check and adjust the reverb setting (page E-14).• Turn power off and then back on to initialize all Digital Keyboardsettings (page E-9).OperationWhen I perform a skip forward or skip backoperation, the skip operation moves multiple songmeasures instead of only a single measure.While song playback is stopped or a Step Up Lesson is in progress,skip forward and skip back operations are performed in phrase units(page E-26).Tone, rhythm, and other settings revert to their initialdefaults whenever you turn on the Digital Keyboard.Though Digital Keyboard settings reset when you turn off the DigitalKeyboard, you can save setups to registration memory for instantrecall whenever you need them (page E-46).Computer ConnectionI can’t exchange data between the Digital Keyboardand a computer.• Check to make sure that the USB cable is connected to the DigitalKeyboard and computer, and that the device is selected correctlywith your computer’s music software settings (page E-65).• Turn off the Digital Keyboard and then exit the music software onyour computer. Next, turn the Digital Keyboard back on and thenrestart the music software on your computer.Symptom Action