EnglishControlling the Keyboard SoundsEN-11The transpose feature lets you change the pitch, in semitonesteps. A simple operation lets you instantly change the pitchto match that of a singer.• The transpose setting range is –12 to +12 semitones.1. Press 3 (FUNCTION).2. Use the bp (10-key) [–] and [+] keys to selectthe transpose setting you want.Use the tuning feature when you need to adjust the pitchslightly to play along with another musical instrument. Also,some artists perform their music with slightly altered tuning.You can use the tuning feature to adjust tuning so it exactlymatches a performance on a CD.• The tuning feature specifies the frequency of the A4 note.You can set a frequency within the range of 415.5 to465.9 Hz. The initial default setting is 440.0 Hz.1. Press 3 (FUNCTION) a number of times until“Tune” appears on the display (page EN-4).2. Use the bp (10-key) [–] and [+] keys to adjustthe tuning.• Performing this step causes the display to change from“Tune” to a value that indicates the current frequencysetting as shown below. You can change the frequencyin 0.1Hz steps.• Even if you do not perform a bp (10-key) operation toadjust the tuning, the current frequency setting willappear automatically after a few seconds.Changing the Pitch(Transpose, Tuning)Changing the Pitch in Semitone Steps(Transpose)Fine Tuning (Tuning)T r a n s .T u n e4 4 0 . 0 H z