57Convenient Operations and SetupsE63s6 : : : : ; ; ; : : 6 6 sDepartmentTo other department keyD9 D8 D7 D6 D5 D4 D3 D2 D1Department key feature programmingThere are two different methods you can use to assign features to department keys.With “Batch feature programming”, you can use a single operation to assign multiple features.“Individual feature programming”, on the other hand, let you assign features one-by-one.This method is recommended for programming of special features to individual department keys.Batch feature programmingWhen using this procedure to assign multiple features to departments, use 9-digit codes that you create using thefollowing procedureMode SwitchPGMNegative departmentHash departmentSingle item saleHigh digit limit specificationTaxable status 1 (for the U.S. model)Taxable status 2 (for the U.S. model)Taxable status 3 (for the U.S. model)Taxable status (for the Canadian model)Non tax = 0, Taxable 1 = 1, Taxable 2 = 2, Taxable 3 = 3, Taxable 4 = 4,Taxable 1 & 2 = 5, Taxable 1 & 3 = 6, Taxable 1 & 4 = 7Always “000”Group link (00 ~ 50)a+b = : D 9: D 8: D 7a+b+c = : D 6: D 6; ~ ; D 5~ D3: : D 2 D1No = 0Yes = 2No = 0Yes = 4No = 0Yes = 1SignificantnumberNo = 0Yes = 1No = 0Yes = 2No = 0Yes = 4SignificantnumberSignificantnumbersababcDepartment designation& (Dept.1)' (Dept.2):. (Dept.24)! (Dept.1) dd! (Dept.49)" (Dept.2) dd" (Dept.50): :% (Dept.24) dd% (Dept.72)d! (Dept.25) ddd! (Dept.73): :d% (Dept.48) ddd% (Dept.96)for the U.S. for CanadaDepartment
