81 EThis section describes what to do when you have problems with operation.When an error occursErrors are indicated by an error tone. When this happens, you can usually find out what the problem is asshown below.Does the display show an error code?No Yes4 844444444444444Press C key and check the appropriate section of this manual for the operation you want to perform.TroubleshootingConvenient Operations & Setups/TroubleshootingError code Meaning Action(Message)Mode switch position changed beforefinalization.Registration without entering a clerknumber.Platen arm of the printer is opened.Registration is made while the cashdrawer is opened.Journal paper endReceipt paper endTransaction cancel buffer full.Finalization of a transaction attemptedwithout confirming the subtotal.Finalize operation attempted withoutentering amount tender.Change amount exceeds preset limit.Read/reset operation without declaringcash in drawer. This error appears onlywhen this function is activated.Return the mode switch to its originalsetting and finalize the operation.Enter a clerk number.Close the platen arm.Close the cash drawer.Replace the new paper roll.Replace the new paper roll.Finalize the transaction.Press the s key.Enter the amount tendered.Input amount tendered again.Perform money declaration.E01(ERR-MODE)E08(SIGN-ON)E10(PRNT-LID)E11(DRW-OPEN)E12(JPAP-END)E14(RPAP-END)E27(BUF-FULL)E31(PRESS-ST)E33(TEND-AMT)E35(CNG-OVER)E38(DECL-AMT)